Select Page
  1. Home
  2. Product
  3. 901 Dynamic & Static Torque Meter Sensor
901 Dynamic & Static Torque Meter Sensor

901 Dynamic & Static Torque Meter Sensor

Short Description:

Labirinth 901 Multi-Axis Force Sensor for Dynamic and Static Torque Measurement

Payment: T/T, L/C, PayPal

Features：

1. Capacities (Nm): ±5……±500000
2. Using a unique non-contact transmission method to input and output signals
3. Can measure dynamic torque and static torque
4. Working principle: Wireless power supply and wireless output
5. There is no need to adjust the zero point when measuring forward and reverse torques.
6. The signal adopts digital technology, strong anti-interference
7. Input power polarity, output torque, speed signal protection
8. There are no wear parts such as collector rings, and it can run at high speed for a long time
9. Torque measurement accuracy has nothing to do with rotation speed and direction
10. High precision and good stability
11. Can measure forward and reverse torque, speed and power
12. Small size, light weight, easy installation
13. High reliability and long life
14. Can be installed in any position and direction

Product Description：

901 torque sensor dynamic torque sensor and static torque sensor. 5N·m to 500000N·m multi-spec dynamic and static torque sensor torque meter.

Dimensions：
901 Dynamic & Static Torque Meter Sensor
901 Model Selection Dimension Table
Torque Range A B C D E F G H I J K L Key (L × W × H) weight
5 N.m 180 110 101 Ø18g6 30 116 74 48 7 10.2 Ø70 78 20×6×6(Single Key) 3.6Kg
10 N.m 180 110 101 Ø18g6 30 116 74 48 7 10.2 Ø70 78 20×6×6(Single Key) 3.6Kg
20 N.m 180 110 101 Ø18g6 30 116 74 48 7 10.2 Ø70 78 20×6×6(Single Key) 3.6Kg
50 N.m 180 110 101 Ø18g6 30 116 74 48 7 10.2 Ø70 78 20×6×6(Single Key) 3.6Kg
100N.m 180 110 101 Ø18g6 30 116 74 48 7 10.2 Ø70 78 20×6×6(Single Key) 3.6Kg
200N.m 201 110 114 Ø28g6 40 117 74 53 7 10.2 Ø80 78 27×8×7(Single Key) 4.8Kg
300N.m 201 110 114 Ø28g6 40 117 74 53 7 10.2 Ø80 78 27×8×7(Single Key) 4.8Kg
500N.m 233 110 127 Ø38g6 55 119 74 59.5 7 10.2 Ø93 78 40×10×8(Single Key) 6.8Kg
1000N.m 305 150 162 Ø50g6 80 142 100 78 12 12.5 Ø116 106 59×14×9(Single Key) 13Kg
2000N.m 305 150 162 Ø50g6 80 142 100 78 12 12.5 Ø116 106 59×14×9(Single Key) 13Kg
3000N.m 343 160 189 Ø75g6 100 139 120 92.5 12 12.5 Ø145 124 68×22×14(Single Key) 21Kg
5000N.m 343 160 189 Ø75g6 100 139 120 92.5 12 12.5 Ø145 124 68×22×14(Single Key) 21Kg
10000N.m 365 180 220 Ø95g6 108 145 120 110 12 12.5 Ø165 130 90×25×14(Double Key) 31Kg
20000N.m 365 180 220 Ø95g6 108 145 120 110 12 12.5 Ø165 130 90×25×14(Double Key) 31Kg
30000N.m 385 240 249 Ø120g6 110 160 120 125 18 16 Ø200 180 90×25×14(Double Key) 57Kg
50000N.m 455 240 279 Ø160g6 140 176 120 140 18 16 Ø230 180 117×36×20(Double Key) 74Kg
60000N.m 155 210 279 Ø160g6 140 176 120 140 18 16 Ø230 180 117×36×20(Double Key) 74Kg

Parameters：

1. The wiring of this series of torque sensors must be connected according to the wiring diagram, and the power can only be turned on after confirmation.

2. Check that the selected power supply must be consistent with the input power supply of the sensor.

3. The output of the signal line cannot be connected to the ground, which will cause a short circuit.

4. The shielding layer of the shielded cable must be connected to the common terminal power supply of +1 5V power supply.

5. When the sensor is fixed, it must be firmly fixed with the equipment base. The center height must be properly adjusted to avoid bending moments. The center height error should be less than 0.05mm.

6. If you have any questions during use, please contact our company in time, and you are not allowed to disassemble it by yourself during the warranty period.

7. Never insert or remove the plug when the power is on.

8. Output signal: Square wave frequency ±15KHz Zero point: 10 KHz, forward full scale: 15KHz, reverse full scale 5KHz Output 4-20mA: Zero torque: 12.000 mA; Forward full scale: 20.000mA; Reverse full scale: 4.000 mA

9. This series of torque sensors can work for a long time due to the induction power supply, and are widely used in torque monitoring of motors, centrifuges, generators, reducers, and diesel engines.

10. If you need to measure the speed, just install a special speed measuring device on the shell of this series of torque sensors The sensor and its tachometer wheel can measure the speed signal of 6-60 square waves per revolution.

11. Using two sets of couplings, install the belt torque sensor between the power source and the load.

12. Power and load equipment must be fixed and reliable to avoid vibration.

13. Fix the base of the torque sensor and the base of the equipment as flexibly as possible (can swing) to avoid bending moment.

901 Dynamic & Static Torque Meter Sensor

Wiring：

901 Dynamic & Static Torque Meter Sensor

1. Grounding
2. +15v
3. -15v
4. Speed signal output
5. Torque signal output